| 161.40.2128.891.41.1503 Standard 5 Slewing Ring Bearings | Basic static load rating C0:140 kN; Basic dynamic load rating C:100 kN; α:7 °; Mass rod end:2.11 kg; r1 min.:0.6 mm; d:40 mm; B:28 mm; Material constant KM:330; G:M 42x3; d2 max.:94 mm; l7 min.:46 mm; h:145 mm; l1 min.:76 mm; dk:53 mm; l2 max.:194 mm; C1 max.:24 mm; Specific dynamic load factor K:100 N/mm²; |
| 21 0411 01 Rollix Slewing Ring Bearings | ANGLE:135 º; Outside Diameter D2:2.8346 in; Inner Width B:1.688 in; D11:1.815 in; Dimension S:0.689 in; D_SEL:5/16-24; Basic Dynamic Radial Load Rating:5730 lbf; TP:0.02 in; Basic Static Radial Load Rating Co:3440 lbf; Diameter D3:1.815 in; Bore Diameter D:1 1/4 in; ZZ:0.06 in; Outher Width C:0.7480 in; Weight W:1.00 lb; |
| 191.40.4500.990.41.1502 Standard 5 Slewing Ring Bearings | Fillet Radius ra:2.00 mm; Accessories:One Seal & Snap-Ring; Sealed Speed Rating n3:3400 rpm; B:54.00 mm; D:130.0000 mm; Basic Dynamic Radial Load Rating C:121000 N; d:60.000 mm; Oil Speed Rating n2:4500 rpm; Grease Speed Rating n1:3400 rpm; Basic Static Radial Load Rating Co:95000 N; |
| 61.50.2355.001.49.1504 Standard 5 Slewing Ring Bearings | Dynamic (Ca):4920 kN; Static (Coa):11600 kN; b:mm; s:17 mm; B:185 mm; d2:1000 mm; D:1320 mm; F:1090 mm; r1s (min):10 mm; b1:mm; d2 (max):mm; rs (min):10 mm; E:mm; Pu:678.120 kN; |
| 12.45.2940.001.49.1502 Standard 5 Slewing Ring Bearings | PG:1/4 NPT; Taconite seal:TER 149; A2:314.325 mm; Eye bolt:2 x 3/8-16 UNC; P120°:196 kN; Ca:95.809 mm; J1:117.475 mm; A1:180.975 mm; Appropriate attachment bolt size G:1 in; J max.:600.075 mm; H2:76.2 mm; Housing:SAFS 536; S:4.763 mm; N1:28.575 mm; R2:41.275 mm; P150°:173 kN; Initial grease fill:1304.1 g; R1:114.3 mm; h:60.325 mm; Stabilizing ring:SR-36-30; |
| 92.35.2012.991.41.1502 Standard 5 Slewing Ring Bearings | D:160.0000 mm; d:75.000 mm; Width - Outer Ring B0:37.0 mm; Fillet Radius ra:2.00 mm; Basic Radial Load Rating-Static SCO:116000 N; Diameter E:101.0 mm; Speed Rating-Open and Shielded-Grease OSG:3500 rpm; Speed Rating-Open and Shielded-Oil OSO:4300 rpm; Basic Radial Load Rating-Dynamic DC:125000 N; Width - Inner Ring B1:68.26 mm; Accessories:300WI Filling Notch; |
| 162.28.1700.890.11.1503 Standard 5 Slewing Ring Bearings | d:80.000 mm; B:44.45 mm; Basic Static Radial Load Rating Co:53000 N; Fillet Radius ra:2.00 mm; Grease Speed Rating Open/Shielded n1:4500 rpm; Sealed Speed Rating n3:3000 rpm; Accessories:Metal Shields; Oil Speed Rating Open/Shielded n2:5300 rpm; D:140.0000 mm; Basic Dynamic Radial Load Rating C:78000 N; |
| 121.32.4000.990.41.1502 Standard 5 Slewing Ring Bearings | r1,2 min.:2.1 mm; Calculation factor kr:0.14; Basic dynamic load rating C:952 kN; ra max.:1.5 mm; F:411 mm; b:16.7 mm; Limiting speed:1300 r/min; Da max.:469 mm; s max.:3.5 mm; D1 ≈:445 mm; d:380 mm; Mass bearing:44 kg; Fatigue load limit Pu:212 kN; Reference speed:1200 r/min; Design variant/feature:NNU K/W33; K:9 mm; Basic static load rating C0:2550 kN; B:100 mm; da max.:406 mm; D:480 mm; |
| 11.40.2795.000.11.1502 Standard 5 Slewing Ring Bearings | F:28 mm; d:22 mm; r, r1,2 min.:0.3 mm; B:20.5 mm; Mass inner ring:0.036 kg; |
| 12.45.2940.000.19.1502 Standard 5 Slewing Ring Bearings | Weight W:0.51 lb; Basic Dynamic Radial Load Rating:2380 lbf; Dimension F:0.5000 in; Insert Bearing IB:Stainless Steel; Height H:2.6250 in; Dimension L:3.0000 in; Basic Static Radial Load Rating Co:1470 lbf; Shaft Diameter D:3/4 in; Dimension H1:1.3125 in; Thread Diameter G:3/8-16; Dimension S1:0.7188 in; Distance J:2.0000 in; Width A:1.4375 in; |
| 12.30.2330.001.41.1503 Standard 5 Slewing Ring Bearings | B:29.00 mm; Accessories:Without Accessories; D:120.0000 mm; Oil Speed Rating Open/Shielded n2:5600 rpm; Fillet Radius ra:2.00 mm; Grease Speed Rating Open/Shielded n1:4600 rpm; Basic Static Radial Load Rating Co:65500 N; Basic Dynamic Radial Load Rating C:79200 N; d:55.000 mm; |
| 11.50.3347.001.49.1502 Standard 5 Slewing Ring Bearings | J max.:333.375 mm; A1:111.125 mm; L:387.35 mm; J1:60.325 mm; Stabilizing ring:SR-20-17; Cap bolt, SAE grade:5; End plug (suffix Y):EPR 15; PG:1/4 NPT; Max. speed for Taconite seal:900 r/min; RG:3/8 NPT; P150°:40 kN; P180°:48.9 kN; S:4.763 mm; R2:30.163 mm; H2:44.45 mm; ba:44.45 mm; H1:114.3 mm; P60°:119 kN; Cap bolt:2 x 3/4-10 UNC; Taconite seal:TER 102; |