| 38 0411 01 Rollix Slewing Ring Bearings | Basic Static Radial Load Rating Co:4750 N; Oil Speed Rating Open/Shielded n2:20000 rpm; Accessories:One Shield & Snap-Ri; Fillet Radius ra:0.64 mm; Basic Dynamic Radial Load Rating C:9560 N; Grease Speed Rating Open/Shielded n1:17000 rpm; Oil Speed Rating n2:20000 rpm; B:12.00 mm; Sealed Speed Rating n3:12000 rpm; d:17.000 mm; D:40.0000 mm; Grease Speed Rating n1:17000 rpm; |
| 162.45.2654.891.41.1503 Standard 5 Slewing Ring Bearings | PG:1/4 NPT; R1:67.866 mm; Pa:17.3 kN; P90°:107 kN; Initial grease fill:232.47 g; P60°:178 kN; Taconite seal:TER 557; Cap bolt recommended tightening torque:298.3 N·m; Ca:62.89 mm; ba:50.006 mm; L:419.1 mm; R2:31.75 mm; End plug (suffix Y):EPR 13; A1:120.65 mm; h:45.244 mm; RG:3/8 NPT; S:4.763 mm; Cap bolt, SAE grade:8; Max. speed for Taconite seal:775 r/min; Housing:SSAFS 522; |
| 11.35.2220.000.11.1503 Standard 5 Slewing Ring Bearings | d:30 mm; Fatigue load limit Pu:0.475 kN; s1:23 mm; Housing material:Cast iron; RG:1/4-28 UNF; A3:3.2 mm; Db1:76 mm; Da:93.7 mm; B1:37 mm; Db2:84 mm; J:82.5 mm; Mass bearing unit:1.05 kg; A:32.5 mm; N:11.5 mm; Recommended diameter for attachment bolts, mm G:10 mm; Limiting speed:1200 r/min; Recommended tightening torque for grub screw:4.2 N·m; Thread grub screw G2:M5; J7:24.5 mm; Hexagonal key size for grub screw N:2.5 mm; |
| 192.25.2240.990.41.1502 Standard 5 Slewing Ring Bearings | Mass plain bearing:2.04 kg; M:4 mm; rb max.:1 mm; D:105 mm; α:17 °; C:40 mm; da max.:67 mm; Sealing solution:Triple-lip seals; ra max.:1 mm; da min.:67 mm; Da max.:99 mm; Material constant KM:330; Specific static load factor K0:500 N/mm²; b1:7.7 mm; B:63 mm; d:60 mm; Basic static load rating C0:1560 kN; dk:92 mm; Design (sliding contact surface combination):Steel/steel, heavy-d; Basic dynamic load rating C:315 kN; |
| 2 0422 Rollix Slewing Ring Bearings | d2:73.819 mm; H:114.3 mm; Mass bearing unit:4.76 kg; J max.:180.975 mm; A1:80.169 mm; J min.:174.625 mm; H2:33.337 mm; L:225.425 mm; da:49.212 mm; A:63.5 mm; Basic dynamic load rating C:84.5 kN; B:73.025 mm; H1:57.15 mm; s:25.4 mm; Limiting speed:1450 r/min; Attachment bolt diameter G:15.875 mm; S:0.794 mm; |
| 12.50.3739.001.49.1502 Standard 5 Slewing Ring Bearings | Taconite seal:TER 45; Ca:67.793 mm; Max. speed for Taconite seal:1150 r/min; h:42.862 mm; End plug (suffix Y):EPR 8; Cap bolt, SAE grade:8; J min.:269.875 mm; J max.:320.675 mm; H2:44.45 mm; P60°:85.9 kN; Housing:SAF 616; A2:233.363 mm; RG:3/8 NPT; da:69.85 mm; Cap bolt recommended tightening torque:515.2 N·m; Da:170 mm; P120°:32 kN; Cap bolt:2 x 3/4-10 UNC; Initial grease fill:181.44 g; |
| 191.25.2800.990.41.1502 Standard 5 Slewing Ring Bearings | J6:378 mm; Eye bolt, size:2 x M 10; P120°:350 kN; N4 max.:8 mm; H1:140 mm; L:410 mm; Oil seal:2 x TSN 320 U; Appropriate attachment bolt, size G:24 mm; Cap bolt, size:M 20x100; Appropriate attachment bolt, rec. tightening torque:665 N·m; N:32 mm; Ca:86 mm; Mass housing:26.2 kg; H2:45 mm; Oil level, max.:61 mm; Q180°:310 kN; Q120°:620 kN; P150°:320 kN; Q150°:360 kN; Locating ring:2 x FRB 19.5/215; |
| 62.50.1800.001.49.1504 Standard 5 Slewing Ring Bearings | M2:46 mm; Spring washer in accordance with DIN 128:A 20; M1:7 mm; M:21 mm; B:60 mm; M3:22 mm; Mass locking clip:0.26 kg; Hexagonal head bolt:M 20x40; |
| 161.50.2800.891.41.1503 Standard 5 Slewing Ring Bearings | N1:22.225 mm; Stabilizing ring:2 x SR-1522; da:110 mm; P180°:60.9 kN; PG:1/4 NPT; P150°:50.7 kN; End plug (suffix Y):EPR 15; RG:3/8 NPT; ba:42.069 mm; H:239.316 mm; J1:69.85 mm; Ca:62.789 mm; J max.:368.3 mm; Cap bolt, SAE grade:5; L:419.1 mm; H2:50.8 mm; A1:120.65 mm; Initial grease fill:481.95 g; Taconite seal (dc shaft position):TER 113; P120°:55.6 kN; |
| 191.32.2240.990.41.1502 Standard 5 Slewing Ring Bearings | with cylindrical bore:500 min-1; Oil:525.760 kN; Static (Cor):22.3 mm; Pu:3500 kN; D:650 mm; Dynamic (Cr):12 mm; with tapered bore:630 min-1; B:157 mm; d:440 mm; Grease:7170 kN; rs (min):6 mm; |
| 36 0411 01 Rollix Slewing Ring Bearings | Ca:30.785 mm; R1:34.131 mm; L:244.475 mm; P60°:44.9 kN; Cap bolt:2 x 1/2-13 UNC; Cap bolt recommended tightening torque:81.3 N·m; End plug (suffix Y):EPR 5; h:31.75 mm; Appropriate attachment bolt size G:0.625 in; Da:100 mm; R2:15.875 mm; PG:1/8 NPT; Taconite seal:TER 24; Pa:3.47 kN; J max.:209.55 mm; A2:171.45 mm; J min.:187.325 mm; H2:23.813 mm; ba:25.4 mm; Max. speed for Taconite seal:1575 r/min; |
| 161.40.2368.890.11.1503 Standard 5 Slewing Ring Bearings | B:25.00 mm; Oil Speed Rating Open/Shielded n2:8500 rpm; Grease Speed Rating Open/Shielded n1:7000 rpm; D:100.0000 mm; Sealed Speed Rating n3:4900 rpm; d:35.000 mm; Fillet Radius ra:1.50 mm; Accessories:Without Accessories; Basic Static Radial Load Rating Co:31000 N; Basic Dynamic Radial Load Rating C:55300 N; |