| 121.32.4250.990.41.1502 Standard 5 Slewing Ring Bearings | Calculation factor Y1:2.2; Fatigue load limit Pu:1120 kN; Mass bearing:515 kg; d:580 mm; Calculation factor Y2:3.3; Calculation factor e:0.31; Basic dynamic load rating C:6820 kN; d1 ≈:636 mm; r1,2 min.:3 mm; Design variant/feature:TDI.1/Y2; Calculation factor Y0:2.2; r3,4 min.:6 mm; D1 ≈:742 mm; Comparative axial load rating CFa:524 kN; Thrust factor K:1.87; Comparative radial load rating CF:1700 kN; |
| 191.20.1800.990.41.1502 Standard 5 Slewing Ring Bearings | Da:289.999 mm; H2:66.675 mm; Ca:89.789 mm; P180°:145 kN; Max. speed for Taconite seal:440 r/min; PG:1/4 NPT; L:558.8 mm; A1:158.75 mm; da:174.625 mm; End plug (suffix Y):EPR 21; Cap bolt recommended tightening torque:813.5 N·m; Eye bolt:2 x 3/8-16 UNC; Taconite seal:TER 154; P120°:133 kN; J min.:441.325 mm; J1:95.25 mm; H:338.137 mm; P150°:120 kN; Mass pillow block:121 kg; Appropriate attachment bolt size G:1 in; |
| 8 0475 08 Rollix Slewing Ring Bearings | Accessories:One Shield; d:90.000 mm; B:18.00 mm; Basic Dynamic Radial Load Rating C:32500 N; D:125.0000 mm; Grease Speed Rating Open/Shielded n1:5000 rpm; Basic Static Radial Load Rating Co:31500 N; Sealed Speed Rating n3:3100 rpm; Fillet Radius ra:1.00 mm; Oil Speed Rating Open/Shielded n2:6000 rpm; |
| 1 0422 01 Rollix Slewing Ring Bearings | Calculation factor Y1:2; Comparative radial load rating CF:3750 kN; Fatigue load limit Pu:2550 kN; Design variant/feature:TQON/GW; Thrust factor K:1.76; r1,2 min.:7.5 mm; B:618 mm; Calculation factor Y0:2; Comparative axial load rating CFa:602 kN; Mass bearing:1795 kg; D1 ≈:754 mm; T:618 mm; d1 ≈:642 mm; Basic dynamic load rating C:17300 kN; Calculation factor e:0.33; D:920 mm; d:560 mm; |
| 21 0411 01 Rollix Slewing Ring Bearings | ANGLE:135 º; Outside Diameter D2:2.8346 in; Inner Width B:1.688 in; D11:1.815 in; Dimension S:0.689 in; D_SEL:5/16-24; Basic Dynamic Radial Load Rating:5730 lbf; TP:0.02 in; Basic Static Radial Load Rating Co:3440 lbf; Diameter D3:1.815 in; Bore Diameter D:1 1/4 in; ZZ:0.06 in; Outher Width C:0.7480 in; Weight W:1.00 lb; |
| 91.30.1799.991.21.1502 Standard 5 Slewing Ring Bearings | Specific static load factor K0:45 N/mm²; a:8 mm; Mass bushing:4.85 kg; Tolerance shaft:e7; d:100 mm; Coefficient of friction µ min.:0.08; Permissible sliding velocity v max.:0.5 m/s; Tolerance housing:H7; D:120 mm; Coefficient of friction µ max.:0.15; Permissible sliding velocity v min.:0 m/s; α:124 °; Specific dynamic load factor K:25 N/mm²; h:101.5 mm; B:160 mm; |
| 161.45.2240.891.41.1503 Standard 5 Slewing Ring Bearings | with tapered bore:400 min-1; D:820 mm; Dynamic (Cr):12 mm; Grease:10690 kN; rs (min):6 mm; d:560 mm; Static (Cor):22.3 mm; Oil:730.310 kN; B:195 mm; Pu:5110 kN; with cylindrical bore:320 min-1; |
| 7 0489 11 Rollix Slewing Ring Bearings | Fillet Radius ra:1.50 mm; Accessories:One Seal; Grease Speed Rating Open/Shielded n1:2200 rpm; B:24.00 mm; Basic Static Radial Load Rating Co:95000 N; Basic Dynamic Radial Load Rating C:76100 N; D:250.0000 mm; Sealed Speed Rating n3:0 rpm; Oil Speed Rating Open/Shielded n2:2800 rpm; d:200.000 mm; |
| 192.32.2800.990.41.1502 Standard 5 Slewing Ring Bearings | Attainable speed for grease lubrication:27000 r/min; da min.:44.6 mm; Static axial stiffness, preload class A:87 N/µm; dn:51.6 mm; D1:58.25 mm; d2:47.6 mm; Calculation factor fHC:1; Calculation factor (back-to-back, face-to-face) Y2:1.41; Static axial stiffness, preload class B:129 N/µm; Number of balls z:19; K:0.5 mm; Attainable speed for oil-air lubrication:41000 r/min; db min.:44.6 mm; |
| 62.40.1700.008.29.1503 Standard 5 Slewing Ring Bearings | Basic Static Radial Load Rating Co:88000 N; Basic Dynamic Radial Load Rating C:95600 N; Oil Speed Rating n2:4300 rpm; B:41.30 mm; Grease Speed Rating n1:3200 rpm; d:75.000 mm; Accessories:One Seal; Fillet Radius ra:1.50 mm; Sealed Speed Rating n3:3200 rpm; D:130.0000 mm; |
| 11.40.2915.001.41.1502 Standard 5 Slewing Ring Bearings | Mass pillow block:44 kg; H:230.981 mm; Cap bolt recommended tightening torque:515.2 N·m; Cap bolt, SAE grade:8; J max.:342.9 mm; P60°:128 kN; P180°:54.3 kN; Labyrinth ring:2 x LOR 189; H1:120.65 mm; J min.:304.8 mm; Stabilizing ring:SR-21-18; A1:111.125 mm; P150°:44.5 kN; da:82.55 mm; Housing:SAF 618; PG:1/8 NPT; h:47.625 mm; Appropriate attachment bolt size G:0.75 in; A2:174.625 mm; |
| 191.32.4000.990.41.1502 Standard 5 Slewing Ring Bearings | Mass adapter sleeve assembly:0.1 kg; B4:8 mm; d1:23.813 mm; d3:45 mm; d:30 mm; B:7 mm; B1:27 mm; G:M 30x1.5; |